Wired Infrared PIR Sensor Switch for Light (ES-9958J)
Specification:
Model Number: ES-9958J
Operating Voltage: AC 110v~250v(50-60Hz)
Operating Temp.: -20 ~ 50 degree C
Static Power:<0.026W
Load Power:800W
Delay Time:30~300seconds(adjustable)
Load Capacity: all kinds of lights, applicances
Output Mode: Passive
Induction Angle:360 degree coning angle
Detecting Distance:<10m
Lighting detecting Range:10 LUX(adjustable)
Installation Height: 1.4-1.6m
Dimension/Color:89*36mm/Porcelaine
Attentions
1. Install according to the wiring diagram, after the careful check, connet the power supply. 40~80 seconds is needed for preheat.
2. If you need it to induct in daylight, you need to adjust it to daylight induction mode.
3.Detecting will be affected by the environment and other factors, such as temperature, walking spped, cloth, etc.
4. In order to keep the high sensitivity, please do not install the product in strong light envionment and where there is strong cold or heat airflow.
5. This device have the function of repeat triggering, when people in the detecting area, triggering the switch, the device will restart the delay time, so the delay time should be calculated on the last triggering.
Wiring Diagram
Apperance
Audited Supplier 
){kind=link}
){kind=link}