Conventional Smoke Fire Alarm with Remote LED Indicator (ES-5006OSD)

• Type: Smoke Alarm
• Signal Transmission: Wired Alarm
• Working Mode: Passive
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: ES-5006OSD
• Application: Indoor
• Working Principle: Electro-Optical Type
• Mounted Way: Ceiling Mounted
• Detector Type: 2 Wire Conventional
• Operation Voltage: 9-35V
• Alarm Output: Remote LED Indicator
• Dimension: 104 Mm Dia.*47mm Deep
• Transport Package: 100PCS/Carton
• Specification: Suitable to use all over the world
• Trademark: Ease Security
• Origin: China
• HS Code: 8531100000
• Production Capacity: 5000 000PCS/Month

Product Description

Conventional Smoke Fire Alarm with remote LED indicator (ES-5006OSD)

Can work with fire alarm system

 

Main Features

 

Power supply non-polar input:DC 9V~35V             

Stainless steel shield,Anti-RFI;SMT adopted,high stability. 

Dustproof,mothproof and anti-light interference design.                                     

MCU processing adopted,eliminate false alarm.                                                              
Remote LED indicator.                    

Power-off reset.                                                                                      

detection sensitivity:2.06%/ft                   

Dimension: Φ104*49mm .              

Technical Specification 

OPERATING VOLTAGEDC 9V~35V  
STANDBY CURRENT : 55uAALARM  
CURRENT35mA@DC12V 60mA@DC 24V
ALARM INDICATION: red LED on                    
OPERATING TEMPERATURE: -10  +50
OPERATING HUMIDITY :95RHDETECTING  
AREA: 80 square meter(with the installation height of 6m-12m), and 60 square meter (with the installation height of less than  6m)
DIMENSION SIZE :104 mm dia.*47mm deep



Profile

Wiring Diagram


Features/Specification
· Loud 85 decible alarm.
· High sensitivity electrochemical carbon monoxide sensor
· Powered by one 9V battery.
· The alarm sound pattern is pulsed four short alarm beeps for CO alarm and continuous beeps for smoke alarm. The sound
pattern is smoke pattern as CO and smoke occur simultaneously. The red LED will flash while in alarm mode.
· One "chirp" every 30 seconds is an indication that the battery is low(need replacement) or the unit is malfunctioning.
· Test button to test the units electronics and verifies proper unit operation.
· Green and red LED lights that indicate normal operation and alarm status.
· The unit will sound "chirp" and red LED flashes once as power up.
Green LED: The green LED flashes every 30 seconds to indicate the unit is operating properly.
Red LED: When a dangerous level of carbon monoxide is detected and a potential fire is detected, the red LED will flashes and
the alarm pattern will sound.
The CARBON MONOXIDE (CO) & SMOKE combination alarm monitors the air for the presence of CO or a potential fire.
The alarm will sound and be accompanied by the flashing red LED light when there are high levels of CO present or there is a
potential fire present.
CAUTION: This alarm will only indicate the presence of carbon monoxide gas at the sensor. Carbon monoxide gas may
present at other area.
Specification:
Power Supply: one 9V carbon zinc battery 6F22.
Sensitivity Setting:
CO: Alarm Density:
30ppm,alarms not activate within 120minutes
50ppm, alarms within 60~90 minutes
100ppm, alarms within 10~40 minutes
300ppm, alarms within 3 minutes
SMOKE: 1%~5%/FT
Standby Current: <20ua
Alarm Current: <30ma
Operation Ambient Condition: 5~400C, 20~90%R.H

Installation

Type	Output
Wired	Relay NO/NC & Sound
Wireless	RF Signal & sound

 

2 Wire Smoke Detector Connection


4 Wire Smoke Detector Connection


Installation Base



Can WOrk WithFire Alarm Panel




Product Introduction
This product named Photoelectric detector detects the smoke by a couple of infrared diodes. The principle of detecting is granule in the smoke can reflect infrared light. Infrared diodes are placed in the special chamber. The chamber can shield external light, but don't affect the smoke into it. While have no smoke, the diode can receive very weak infrared light. When the smoke entering the chamber, diode can receive more and more light, when the smoke attains the certain density, the detector can give out alarm signal. In order to reduce the interference and lower power consumption, the emitting circuit adopts the pulse signal. The detector adopts the special structure design and ASIC, has the dustproof, mothproof and anti outside light interference feature etc. The detector is suitable for detect the smoke in house, shop, hotel, restaurant, office building, school, bank, library, computer house and storehouse etc.

 

Type	Output	Power
4 Wire	Relay Output	9-35V dc
2 Wire	Remote LED Indicator	9-35V dc
Wireless	RF signal	9V battery

Ease Security is a Hi-tech enterprise which specializes in anti-theft security alarm products and fire alarm products. Our service range covers R&D, manufacture and marketing. Our current main products are fire alarm panel,home alarm system, outdoor active IR beam detector,PIR detector, smoke detector, gas leakage detector, door magnetic switch, panic button, alarm siren and etc.
 

Model	LED Indicator	Power
ES-5006OSD	1	9-35V
ES-5007OSD	2	9-35V

Ease Security is a Hi-tech enterprise which specializes in anti-theft security alarm products and fire alarm products. Our service range covers R&D, manufacture and marketing. Our current main products are fire alarm panel,home alarm system, outdoor active IR beam detector,PIR detector, smoke detector, gas leakage detector, door magnetic switch, panic button, alarm siren and etc.


we are offering you following:

Top quality, product quality is the life of the company;

We have built a whole quality control system according to ISO 9000. Our QC inspects each product in every working procedure to ensure the quality exactly.

Competitive price, price helps our customer be competitive in the market;

We are trying to improve the efficiency in every process to lower the cost without affecting quality.

Excellent service, service is the basis of the company.


We always belive that "Win-Win" strategy is the basis of a long-term cooperation relationship. We are looking forward to establishing a good business relation with you.
 

Model	LED Indicator	Power
ES-5006OSD	1	9-35V
ES-5007OSD	2	9-35V